Comments Off

Stainless Steel Guard Rails El Cajon


Free Quote

El Cajon Stainless Steel Guard Rails

Bannisters are a specific type of railing used at many facilities and establishments. You’ll have seen them before but didn’t know what they were called.

Stainless Steel Guard Rails in El Cajon

To start the installation process, you’re going to need to find the studs in the wall. These should be uniformly spaced along the wall. Here’s where you will install the hardware to hold the rail to the wall. Next, measure the railing to get the right fit on the wall. The railing should stop about an in. or even more from the top and bottom of the steps. If it is way too long, you can cut the rail with the miter saw. The miter saw is also handy for railings that need to bend or turn with the steps. If you have got to make these cuts, make sure that you also have sandpaper and epoxy to smooth out the rough edges after the cut and solidly attach the pieces to each other.

The Services For Stainless Steel Guard Rails We Provide in El Cajon Include:

  • Custom Mezzanines in El Cajon
  • Stainless Steel Guard Rails for Commercial Stairs
  • El Cajon Stainless Steel Guard Rails
  • Stainless Steel Guard Rails El Cajon

Stainless Steel Guard Rails El Cajon – Go With Experience!

A Stainless Steel Guard Rails at a rehabilitation center or infirmary is extremely constructive for folks with special incapacities. If someone has recently recovered from an automobile accident or stroke that resulted in injury to their legs or feet, they’ll have to use the guard rail when they practice walking or standing up all alone. As they progress in their rehabilitation, they are helped with the guard rail until they at last achieve the power to walk on their own again without a cane or hiker.

Stainless Steel Guard Rails Products We Offer in El Cajon:

We Proudly Serve these Southern California Towns and Cities

San Marcos, CA | Vista, CA | Poway, CA | Encinitas, CA | Ramona, CA | Solana Beach, CA | Carlsbad, CA | Oceanside, CA | Fallbrook, CA | Lakeside, CA | Santee, CA | Bostonia, CA | El Cajon, CA | La Mesa, CA | Temecula, CA | San Diego, CA | San Juan Capistrano, CA

For More Info, Please Call Us At 760-740-9069

Stop
Call Tim For a FREE Quote!

 

Tim Whittier
Tim Whittier Custom Welding and Design is your choice for custom Handrails, Guardrails and Cable Rail Systems.
  • We have trusted Tim`s Welding and design for over 20 years
    "We have trusted Tim`s Welding and design for over 20 years for all our steel fabrication needs- One call does it all. We recommend Tim to all our contractors."
    , Owner- Delphi Construction- San Diego Ca Nov 27, 2012
    Tim Whittier Custom Welding and Design
  • Tim Whittier Welding

    26830 Kiavo Dr.
    Valley Center CA 92082 USA

    760-740-9069

TIM WHITTIER WELDING, San Diego`s Custom Welder
FREE QUOTE