Comments Off

Stainless Steel Banisters Santee


Free Quote

Santee Stainless Steel Banisters

Guard rails are a specific type of railing used at many facilities and institutions. You may have seen them before but didn’t know what they were called.

Stainless Steel Banisters in Santee

To begin the installation process, you will need to find the studs in the wall. These should be evenly spaced along the wall. This is where you will install the hardware to hold the rail to the wall. Next, measure the railing to get the right fit on the wall. The railing should stop about an inch or more from the top and bottom of the stairs. If it is far too long, you can cut the rail with the miter saw. The miter saw is also helpful for railings that need to bend or turn with the steps. If you have to make these cuts, make sure that you also have sandpaper and epoxy to smooth down the sharp edges after the cut and solidly attach the pieces to each other.

The Services For Stainless Steel Banisters We Have in Santee Include:

  • Custom Balconies in Santee
  • Stainless Steel Banisters for Commercial Stairs
  • Santee Stainless Steel Banisters
  • Stainless Steel Banisters Santee

Stainless Steel Banisters Santee – Go With Experience!

A Stainless Steel Banisters at a rehab center or hospice is extremely constructive for folk with special incapacities. If someone has just recovered from a car accident or stroke that led to injury to their legs or feet, they have got to use the guard rail when they practice walking or standing up alone. As they progress in their rehabilitation, they are assisted with the guard rail till they ultimately achieve the ability to walk on their own again without a cane or walker.

Stainless Steel Banisters Products We Complete in Santee:

We Proudly Do Stainless Steel Banisters in these Southern California Cities

San Marcos, CA | Vista, CA | Poway, CA | Encinitas, CA | Ramona, CA | Solana Beach, CA | Carlsbad, CA | Oceanside, CA | Fallbrook, CA | Lakeside, CA | Santee, CA | Bostonia, CA | El Cajon, CA | La Mesa, CA | Temecula, CA | San Diego, CA | San Juan Capistrano, CA

For more information, please contact us at 760-740-9069

Hurry!
Call Tim For a FREE Quote!

 

Tim Whittier
Tim Whittier Custom Welding and Design is your choice for custom Handrails, Guardrails and Cable Rail Systems.
  • We have trusted Tim`s Welding and design for over 20 years
    "We have trusted Tim`s Welding and design for over 20 years for all our steel fabrication needs- One call does it all. We recommend Tim to all our contractors."
    , Owner- Delphi Construction- San Diego Ca Nov 27, 2012
    Tim Whittier Custom Welding and Design
  • Tim Whittier Welding

    26830 Kiavo Dr.
    Valley Center CA 92082 USA

    760-740-9069

TIM WHITTIER WELDING, San Diego`s Custom Welder
FREE QUOTE